Gary Herman Companies, LLC

Alpha Rentals dba / Herman Rentals, Inc.

Home About Us Products Downloads Contact Us

Guillotine Saws

SUPER C, MODEL D AND SUPER D

Fast accurate cuts under partically all conditions

Saw Manual

THREE MODELS TO CHOOSE FROM...

Wachs portable Guillotine Famly, cold cut 2" through 24" (50.8 mm - 610 mm) pipe of all materials, as well as solids, such as bar stock and rails. Their compact design and ease of setup provides fast, accurate cutting of pipe for contractors, water departments, gas companies and refineries, petrochemical and processing plants as well as piping applications in the nuclear industry.

 

EASY SETUP, VERTICAL OR HORIZONTAL...

Installation time is approximately 5 minutes! A chain pipe vise clamps the Guillotine Saw to the pipe. The machined cast iron "V"-saddle base assures square cuts at right angles, It can be mounted on horizontal as well as vertical piping, in any position.

 

QUICK COLD CUTS, MINIMAL CLEARANCE...

The Guillotine Saws require minimal clearance (the model Super C needs as little as 2-1/2" on one side of the pipe). All models feature finger tip feed control. The pipe is cold cut in a matter of minutes. A 6" standard wall steel pipe is cut in only 6 minutes. A 16" dia. 1/2" wall steel pipe is cut in about 20 minutes.

 

PORTABLE, RUGGED DESIGN...

The Guillotine Saws combine compact size and lightweight with simple rugged construction for ease of operation and low maintenance.

CAPACITY: Cold cuts all pipe material.

Super C: 2"-12" (50 - 304 mm) pipe Solids thru 12-3/4" (323 mm) dia.
Model D: 6"-18" (152 - 457 mm) pipe Solids thru 18-5/8" (473mm) dia.
Super D: 10"-24" (255 - 610 mm) pipe Solids thru 24-1/2" (622 mm) dia.

DRIVES:

Air Motor: 50 CFM @ 85psi / 1.4 CUM @ 6 Bar
Electric Motor: 15 Amp, 110 or 220 volt single phase
Hydraulic Motor: 10 GPM @ 1500 psi / 38 IS @ 106 Bar.

CLEARANCE:

Model Super C: 28" (711mm ) overall width 2-1/2" (63.5 mm ) on one side minimum.
Model D: 32" (813 mm ) overall width 3" (76 mm ) on one side minimum.
Model Super D: 39" (990.6 mm ) overall width 3" ( 990.6 mm ) on one side minimum.

WEIGHT:

Super C: Operating: 115 lbs. ( 51.75 kg. ) Shipping: 180 lbs. ( 81 kg. )
Model D: Operating: 340 lbs. ( 153 kg. ) Shipping: 415 lbs. ( 186.75 kg. )
Super D: Operating: 515 lbs. ( 232 kg. ) Shipping: 620 lbs. (279 kg. )

DIMENSIONS:

A: Super C: 23-1/2" ( 596.9 mm) / Model D: 31-1/4" ( 793.7 mm ) / Super D: 38-1/4" ( 971.55 mm )
B: Super C: 12-3/4" ( 323. 85 mm) / Model D: 14-1/2" ( 386 mm) / Super D: 14-1/2" ( 368 mm )
C: Super C: 31-1/2" (800.1 mm) / Model D: 37" (939.8 mm) / Super D: 44" (1117.6 mm)
D: Super C: 13 - 1/4" (336.55 mm) Model D: 18 - 3/4" (476.25 mm) / Super D: 24 - 3/4" (628.65 mm)

Wachs Dim Chart

STROKE:
Super C: 2" ( 50.8 mm)
Model D: 2" ( 50.8 mm)
Super D: 4" ( 101.6 mm)

 

Download Page

 
ESCO End Prep Tools Canflex Lift Bags Privacy Policy Links Photo Gallery
2010 Alpha Rentals